Cabinet Making Cut List Planner

Pre-loaded with a complete frameless kitchen base cabinet cut list — customize carcass depth, door heights, grain-matched fronts, and export printable shop cut sheets.

Project Presets:100% Free · Unlimited Runs

Stock Sheets1

Quick Stock:
MaterialLength (mm)Width (mm)QtyCost ($)

Parts Cut List22

Part LabelLength (mm)Width (mm)QtyGrainBanding

Saw & Kerf Settings

Area-BSSF-SLAS
Sheets Needed
3
22/22 pieces placed
Efficiency
81.5%
7.28 m²
Waste Area
18.5%
1.65 m²
Est. Material Cost
$192.00
3 sheets
Linear Saw Cuts
30.04 m
Blade Kerf: 3.2 mm
Edge Banding
21.80 m
T/B/L/R
Amber edge = Edge bandingHatched = Offcut / waste

Edge Banding Roll & Overhang Estimator

Net Banded Length21.80 m
Flush-Trim Overhang (+40mm/edge)+1.20 m
Gross Tape Needed23.00 m
Rolls to Buy1 × 50m
Est. Banding Cost$24.00
Sheet #1 — 4×8 ft Plywood 18mm (2440 × 1220 mm)
6 parts92.4% Used7.6% Waste
2440 mm1220 mm594.4 × 72.8 mm594.4 × 97.6 mmBottom Base Deck — 560 × 1164 mm @ (0 mm, 0 mm)↻ 90°Bottom Base Deck560 × 1164 mmBottom Base Deck — 560 × 1164 mm @ (563.2 mm, 0 mm)↻ 90°Bottom Base Deck560 × 1164 mmCabinet Door Front — 716 × 596 mm @ (1126.4 mm, 0 mm)Cabinet Door Front716 × 596 mmCabinet Door Front — 716 × 596 mm @ (1126.4 mm, 599.2 mm)Cabinet Door Front716 × 596 mmAdjustable Shelf — 572 × 520 mm @ (1845.6 mm, 0 mm)Adjustable Shelf572 × 520 mmAdjustable Shelf — 572 × 520 mm @ (1845.6 mm, 599.2 mm)Adjustable Shelf572 × 520 mm
Sheet #2 — 4×8 ft Plywood 18mm (2440 × 1220 mm)
6 parts82.8% Used17.2% Waste
2440 mm1220 mm720 × 93.6 mm274.4 × 560 mm720 × 93.6 mm274.4 × 656.8 mmCabinet Door Front — 716 × 596 mm @ (0 mm, 0 mm)Cabinet Door Front716 × 596 mmCabinet Door Front — 716 × 596 mm @ (0 mm, 599.2 mm)Cabinet Door Front716 × 596 mmCabinet Side Panel — 720 × 560 mm @ (719.2 mm, 0 mm)Cabinet Side Panel720 × 560 mmCabinet Side Panel — 720 × 560 mm @ (719.2 mm, 563.2 mm)Cabinet Side Panel720 × 560 mmCabinet Side Panel — 720 × 560 mm @ (1442.4 mm, 0 mm)Cabinet Side Panel720 × 560 mmCabinet Side Panel — 720 × 560 mm @ (1442.4 mm, 563.2 mm)Cabinet Side Panel720 × 560 mm
Sheet #3 — 4×8 ft Plywood 18mm (2440 × 1220 mm)
10 parts69.2% Used30.8% Waste
2440 mm1220 mm702 × 133.6 mm1211.6 × 600.8 mmCenter Divider — 702 × 540 mm @ (0 mm, 0 mm)Center Divider702 × 540 mmCenter Divider — 702 × 540 mm @ (0 mm, 543.2 mm)Center Divider702 × 540 mmAdjustable Shelf — 520 × 572 mm @ (705.2 mm, 0 mm)↻ 90°Adjustable Shelf520 × 572 mmAdjustable Shelf — 520 × 572 mm @ (705.2 mm, 575.2 mm)↻ 90°Adjustable Shelf520 × 572 mmToe-Kick Plinth — 1200 × 100 mm @ (1228.4 mm, 0 mm)Toe-Kick Plinth1200 × 100 mmToe-Kick Plinth — 1200 × 100 mm @ (1228.4 mm, 103.2 mm)Toe-Kick Plinth1200 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 206.4 mm)Top Rail Stretcher1164 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 309.6 mm)Top Rail Stretcher1164 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 412.8 mm)Top Rail Stretcher1164 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 516 mm)Top Rail Stretcher1164 × 100 mm

Exact Cut Schedule & Coordinates

22
Sheet / BarPart LabelDimensionsPosition (X, Y)Grain / RotBanding
#1Bottom Base Deck560 × 1164 mm0 mm, 0 mm↻ 90°T
#1Bottom Base Deck560 × 1164 mm563.2 mm, 0 mm↻ 90°T
#1Cabinet Door Front716 × 596 mm1126.4 mm, 0 mmGrain lockedTBLR
#1Cabinet Door Front716 × 596 mm1126.4 mm, 599.2 mmGrain lockedTBLR
#1Adjustable Shelf572 × 520 mm1845.6 mm, 0 mm0°T
#1Adjustable Shelf572 × 520 mm1845.6 mm, 599.2 mm0°T
#2Cabinet Door Front716 × 596 mm0 mm, 0 mmGrain lockedTBLR
#2Cabinet Door Front716 × 596 mm0 mm, 599.2 mmGrain lockedTBLR
#2Cabinet Side Panel720 × 560 mm719.2 mm, 0 mmGrain lockedT
#2Cabinet Side Panel720 × 560 mm719.2 mm, 563.2 mmGrain lockedT
#2Cabinet Side Panel720 × 560 mm1442.4 mm, 0 mmGrain lockedT
#2Cabinet Side Panel720 × 560 mm1442.4 mm, 563.2 mmGrain lockedT
#3Center Divider702 × 540 mm0 mm, 0 mmGrain lockedT
#3Center Divider702 × 540 mm0 mm, 543.2 mmGrain lockedT
#3Adjustable Shelf520 × 572 mm705.2 mm, 0 mm↻ 90°T
#3Adjustable Shelf520 × 572 mm705.2 mm, 575.2 mm↻ 90°T
#3Toe-Kick Plinth1200 × 100 mm1228.4 mm, 0 mmGrain lockedT
#3Toe-Kick Plinth1200 × 100 mm1228.4 mm, 103.2 mmGrain lockedT
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 206.4 mm0°—
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 309.6 mm0°—
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 412.8 mm0°—
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 516 mm0°—

Usable Offcut Scrap Inventory4

Saved offcuts ≥ 100×100 mm (4"×4") suitable for drawers, jigs, or cleats.
SheetMaterialDimensionsPosition (X, Y)
#34×8 ft Plywood 18mm1211.6 × 600.8 mm1228.4 mm, 619.2 mm
#24×8 ft Plywood 18mm274.4 × 656.8 mm2165.6 mm, 563.2 mm
#24×8 ft Plywood 18mm274.4 × 560 mm2165.6 mm, 0 mm
#34×8 ft Plywood 18mm702 × 133.6 mm0 mm, 1086.4 mm

Frameless & Face-Frame Cabinet Cut Lists Without Math Errors

Building a kitchen or pantry run involves dozens of repetitive sides, bottom decks, nailers, dividers, adjustable shelves, and grain-matched doors. A single kerf miscalculation throws off hinge reveals across the entire wall.

Load the Kitchen Base Cabinet preset above, adjust lengths or quantities for your specific run, and print the multi-page PDF plan directly for your saw station.

Cabinetmaker Layout Tips

  • Group 18 mm (3/4") carcass panels separately from 6 mm (1/4") back panels by running one cut plan per sheet thickness.
  • Mark front edges of sides, shelves, and decks with Top (T) banding and all 4 edges (TBLR) on slab doors and drawer fronts.
  • Export the CSV schedule to stick numbered part labels onto panels as they come off the saw.

Specialized Material Cut Optimizers

Workshop Engineering Guides

Workshop Questions & Technical FAQ

How should I separate 3/4" cabinet carcass stock from 1/4" back panels?
Save your 3/4" (18 mm) carcass cut list using Save / Load, then create a second saved project for 1/4" (6 mm) backs or 1/2" (12 mm) drawer boxes.
Does the planner remember grain direction for matched drawer fronts?
Yes. Checking the Grain column locks parts lengthwise along the sheet veneer so vertical woodgrain stays consistent across doors and gables.
Can I import my cabinet parts from SketchUp or Excel?
Yes. Click Import CSV and paste columns directly from Excel, Google Sheets, or any SketchUp cabinet extension.