Plywood Cut List Optimizer (4×8 & Baltic Birch)

Maximize yield across 4×8 ft (2440×1220 mm) and 5×5 ft Baltic birch sheets with accurate blade kerf, veneer grain lock, and printable shop diagrams.

Project Presets:100% Free · Unlimited Runs

Stock Sheets1

Quick Stock:
MaterialLength (mm)Width (mm)QtyCost ($)

Parts Cut List22

Part LabelLength (mm)Width (mm)QtyGrainBanding

Saw & Kerf Settings

Area-BSSF-SLAS
Sheets Needed
3
22/22 pieces placed
Efficiency
81.5%
7.28 m²
Waste Area
18.5%
1.65 m²
Est. Material Cost
$192.00
3 sheets
Linear Saw Cuts
30.04 m
Blade Kerf: 3.2 mm
Edge Banding
21.80 m
T/B/L/R
Amber edge = Edge bandingHatched = Offcut / waste

Edge Banding Roll & Overhang Estimator

Net Banded Length21.80 m
Flush-Trim Overhang (+40mm/edge)+1.20 m
Gross Tape Needed23.00 m
Rolls to Buy1 × 50m
Est. Banding Cost$24.00
Sheet #1 — 4×8 ft Plywood 18mm (2440 × 1220 mm)
6 parts92.4% Used7.6% Waste
2440 mm1220 mm594.4 × 72.8 mm594.4 × 97.6 mmBottom Base Deck — 560 × 1164 mm @ (0 mm, 0 mm)↻ 90°Bottom Base Deck560 × 1164 mmBottom Base Deck — 560 × 1164 mm @ (563.2 mm, 0 mm)↻ 90°Bottom Base Deck560 × 1164 mmCabinet Door Front — 716 × 596 mm @ (1126.4 mm, 0 mm)Cabinet Door Front716 × 596 mmCabinet Door Front — 716 × 596 mm @ (1126.4 mm, 599.2 mm)Cabinet Door Front716 × 596 mmAdjustable Shelf — 572 × 520 mm @ (1845.6 mm, 0 mm)Adjustable Shelf572 × 520 mmAdjustable Shelf — 572 × 520 mm @ (1845.6 mm, 599.2 mm)Adjustable Shelf572 × 520 mm
Sheet #2 — 4×8 ft Plywood 18mm (2440 × 1220 mm)
6 parts82.8% Used17.2% Waste
2440 mm1220 mm720 × 93.6 mm274.4 × 560 mm720 × 93.6 mm274.4 × 656.8 mmCabinet Door Front — 716 × 596 mm @ (0 mm, 0 mm)Cabinet Door Front716 × 596 mmCabinet Door Front — 716 × 596 mm @ (0 mm, 599.2 mm)Cabinet Door Front716 × 596 mmCabinet Side Panel — 720 × 560 mm @ (719.2 mm, 0 mm)Cabinet Side Panel720 × 560 mmCabinet Side Panel — 720 × 560 mm @ (719.2 mm, 563.2 mm)Cabinet Side Panel720 × 560 mmCabinet Side Panel — 720 × 560 mm @ (1442.4 mm, 0 mm)Cabinet Side Panel720 × 560 mmCabinet Side Panel — 720 × 560 mm @ (1442.4 mm, 563.2 mm)Cabinet Side Panel720 × 560 mm
Sheet #3 — 4×8 ft Plywood 18mm (2440 × 1220 mm)
10 parts69.2% Used30.8% Waste
2440 mm1220 mm702 × 133.6 mm1211.6 × 600.8 mmCenter Divider — 702 × 540 mm @ (0 mm, 0 mm)Center Divider702 × 540 mmCenter Divider — 702 × 540 mm @ (0 mm, 543.2 mm)Center Divider702 × 540 mmAdjustable Shelf — 520 × 572 mm @ (705.2 mm, 0 mm)↻ 90°Adjustable Shelf520 × 572 mmAdjustable Shelf — 520 × 572 mm @ (705.2 mm, 575.2 mm)↻ 90°Adjustable Shelf520 × 572 mmToe-Kick Plinth — 1200 × 100 mm @ (1228.4 mm, 0 mm)Toe-Kick Plinth1200 × 100 mmToe-Kick Plinth — 1200 × 100 mm @ (1228.4 mm, 103.2 mm)Toe-Kick Plinth1200 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 206.4 mm)Top Rail Stretcher1164 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 309.6 mm)Top Rail Stretcher1164 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 412.8 mm)Top Rail Stretcher1164 × 100 mmTop Rail Stretcher — 1164 × 100 mm @ (1228.4 mm, 516 mm)Top Rail Stretcher1164 × 100 mm

Exact Cut Schedule & Coordinates

22
Sheet / BarPart LabelDimensionsPosition (X, Y)Grain / RotBanding
#1Bottom Base Deck560 × 1164 mm0 mm, 0 mm↻ 90°T
#1Bottom Base Deck560 × 1164 mm563.2 mm, 0 mm↻ 90°T
#1Cabinet Door Front716 × 596 mm1126.4 mm, 0 mmGrain lockedTBLR
#1Cabinet Door Front716 × 596 mm1126.4 mm, 599.2 mmGrain lockedTBLR
#1Adjustable Shelf572 × 520 mm1845.6 mm, 0 mm0°T
#1Adjustable Shelf572 × 520 mm1845.6 mm, 599.2 mm0°T
#2Cabinet Door Front716 × 596 mm0 mm, 0 mmGrain lockedTBLR
#2Cabinet Door Front716 × 596 mm0 mm, 599.2 mmGrain lockedTBLR
#2Cabinet Side Panel720 × 560 mm719.2 mm, 0 mmGrain lockedT
#2Cabinet Side Panel720 × 560 mm719.2 mm, 563.2 mmGrain lockedT
#2Cabinet Side Panel720 × 560 mm1442.4 mm, 0 mmGrain lockedT
#2Cabinet Side Panel720 × 560 mm1442.4 mm, 563.2 mmGrain lockedT
#3Center Divider702 × 540 mm0 mm, 0 mmGrain lockedT
#3Center Divider702 × 540 mm0 mm, 543.2 mmGrain lockedT
#3Adjustable Shelf520 × 572 mm705.2 mm, 0 mm↻ 90°T
#3Adjustable Shelf520 × 572 mm705.2 mm, 575.2 mm↻ 90°T
#3Toe-Kick Plinth1200 × 100 mm1228.4 mm, 0 mmGrain lockedT
#3Toe-Kick Plinth1200 × 100 mm1228.4 mm, 103.2 mmGrain lockedT
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 206.4 mm0°—
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 309.6 mm0°—
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 412.8 mm0°—
#3Top Rail Stretcher1164 × 100 mm1228.4 mm, 516 mm0°—

Usable Offcut Scrap Inventory4

Saved offcuts ≥ 100×100 mm (4"×4") suitable for drawers, jigs, or cleats.
SheetMaterialDimensionsPosition (X, Y)
#34×8 ft Plywood 18mm1211.6 × 600.8 mm1228.4 mm, 619.2 mm
#24×8 ft Plywood 18mm274.4 × 656.8 mm2165.6 mm, 563.2 mm
#24×8 ft Plywood 18mm274.4 × 560 mm2165.6 mm, 0 mm
#34×8 ft Plywood 18mm702 × 133.6 mm0 mm, 1086.4 mm

Eliminate Costly Plywood Offcuts on 4×8 & 5×5 Sheets

Cabinet-grade birch, maple, and oak plywood routinely costs $65–$110 per 4×8 ft sheet. Saving even a single sheet on a built-in or kitchen project immediately pays for hardware and finish.

PlankWise runs ten guillotine nesting passes simultaneously and automatically keeps the layout requiring the fewest plywood sheets and shortest total rip/crosscut length — ready for your table saw or track saw.

Plywood Breakdown Checklist

  • Break full 4×8 sheets down into manageable rough strips with a track saw before final table saw sizing.
  • Verify whether your plywood face veneer runs along the 2440 mm (96") length before locking grain on doors and cabinet sides.
  • Review the Usable Offcut Inventory below the diagrams to tag leftover panels for drawer bottoms, French cleats, or shop jigs.

Specialized Material Cut Optimizers

Workshop Engineering Guides

Workshop Questions & Technical FAQ

What exact dimensions should I enter for a US 4×8 sheet of plywood?
Standard North American structural and cabinet plywood measures 48" × 96" (1220 × 2440 mm). Baltic birch metric sheets commonly measure 60" × 60" (1525 × 1525 mm) — both are available as 1-click stock presets.
Should I enable edge trim when cutting cabinet plywood?
If sheet edges have forklift dents or minor delamination, enter a 5–10 mm (1/4"–3/8") edge trim margin so all finished parts nest safely inside clean factory material.
Can I export my plywood nesting diagram for a CNC router?
Yes. Click Export CAD DXF to download a free AutoCAD R12 DXF file containing separate STOCK, PARTS, and LABELS layers compatible with VCarve, Fusion 360, and Cabinet Vision.