MDF & Melamine Sheet Cut Optimizer

Built for melamine-faced chipboard (MFC) and MDF cabinetry — supports EU 2800×2070 mm, LatAm 2750×1830 mm, and US 49"×97" oversize sheets with automatic edge banding totals.

Project Presets:100% Free · Unlimited Runs

Stock Sheets1

Quick Stock:
MaterialLength (mm)Width (mm)QtyCost ($)

Parts Cut List18

Part LabelLength (mm)Width (mm)QtyGrainBanding

Saw & Kerf Settings

Length-BSSF-Vert
Sheets Needed
2
18/18 pieces placed
Efficiency
54.0%
6.26 m²
Waste Area
46.0%
5.33 m²
Est. Material Cost
$172.00
2 sheets
Linear Saw Cuts
44.90 m
Blade Kerf: 3.2 mm
Edge Banding
28.47 m
T/B/L/R
Amber edge = Edge bandingHatched = Offcut / waste

Edge Banding Roll & Overhang Estimator

Net Banded Length28.47 m
Flush-Trim Overhang (+40mm/edge)+1.84 m
Gross Tape Needed30.31 m
Rolls to Buy1 × 50m
Est. Banding Cost$24.00
Sheet #1 — EU Melamine 18mm (2800 × 2070 mm)
12 parts75.3% Used24.7% Waste
2800 mm2070 mm383.6 × 2060 mm800 × 127.2 mm788 × 320.8 mm770 × 187.2 mmBottom Base Deck — 1600 × 480 mm @ (5 mm, 5 mm)Bottom Base Deck1600 × 480 mmBottom Base Deck — 1600 × 480 mm @ (5 mm, 488.2 mm)Bottom Base Deck1600 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 5 mm)Cabinet Side Panel800 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 488.2 mm)Cabinet Side Panel800 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 971.4 mm)Cabinet Side Panel800 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 1454.6 mm)Cabinet Side Panel800 × 480 mmDrawer Front — 788 × 190 mm @ (5 mm, 971.4 mm)Drawer Front788 × 190 mmDrawer Front — 788 × 190 mm @ (5 mm, 1164.6 mm)Drawer Front788 × 190 mmDrawer Front — 788 × 190 mm @ (5 mm, 1357.8 mm)Drawer Front788 × 190 mmDrawer Front — 788 × 190 mm @ (5 mm, 1551 mm)Drawer Front788 × 190 mmAdjustable Shelf — 770 × 450 mm @ (796.2 mm, 971.4 mm)Adjustable Shelf770 × 450 mmAdjustable Shelf — 770 × 450 mm @ (796.2 mm, 1424.6 mm)Adjustable Shelf770 × 450 mm
Sheet #2 — EU Melamine 18mm (2800 × 2070 mm)
6 parts32.7% Used67.3% Waste
2800 mm2070 mm450 × 513.6 mm1573.6 × 2060 mm760 × 463.2 mmAdjustable Shelf — 450 × 770 mm @ (5 mm, 5 mm)↻ 90°Adjustable Shelf450 × 770 mmAdjustable Shelf — 450 × 770 mm @ (5 mm, 778.2 mm)↻ 90°Adjustable Shelf450 × 770 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 5 mm)Cabinet Door Front760 × 396 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 404.2 mm)Cabinet Door Front760 × 396 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 803.4 mm)Cabinet Door Front760 × 396 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 1202.6 mm)Cabinet Door Front760 × 396 mm

Exact Cut Schedule & Coordinates

18
Sheet / BarPart LabelDimensionsPosition (X, Y)Grain / RotBanding
#1Bottom Base Deck1600 × 480 mm5 mm, 5 mmGrain lockedTLR
#1Bottom Base Deck1600 × 480 mm5 mm, 488.2 mmGrain lockedTLR
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 5 mmGrain lockedT
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 488.2 mmGrain lockedT
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 971.4 mmGrain lockedT
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 1454.6 mmGrain lockedT
#1Drawer Front788 × 190 mm5 mm, 971.4 mmGrain lockedTBLR
#1Drawer Front788 × 190 mm5 mm, 1164.6 mmGrain lockedTBLR
#1Drawer Front788 × 190 mm5 mm, 1357.8 mmGrain lockedTBLR
#1Drawer Front788 × 190 mm5 mm, 1551 mmGrain lockedTBLR
#1Adjustable Shelf770 × 450 mm796.2 mm, 971.4 mm0°T
#1Adjustable Shelf770 × 450 mm796.2 mm, 1424.6 mm0°T
#2Adjustable Shelf450 × 770 mm5 mm, 5 mm↻ 90°T
#2Adjustable Shelf450 × 770 mm5 mm, 778.2 mm↻ 90°T
#2Cabinet Door Front760 × 396 mm458.2 mm, 5 mmGrain lockedTBLR
#2Cabinet Door Front760 × 396 mm458.2 mm, 404.2 mmGrain lockedTBLR
#2Cabinet Door Front760 × 396 mm458.2 mm, 803.4 mmGrain lockedTBLR
#2Cabinet Door Front760 × 396 mm458.2 mm, 1202.6 mmGrain lockedTBLR

Usable Offcut Scrap Inventory7

Saved offcuts ≥ 100×100 mm (4"×4") suitable for drawers, jigs, or cleats.
SheetMaterialDimensionsPosition (X, Y)
#2EU Melamine 18mm1573.6 × 2060 mm1221.4 mm, 5 mm
#1EU Melamine 18mm383.6 × 2060 mm2411.4 mm, 5 mm
#2EU Melamine 18mm760 × 463.2 mm458.2 mm, 1601.8 mm
#1EU Melamine 18mm788 × 320.8 mm5 mm, 1744.2 mm
#2EU Melamine 18mm450 × 513.6 mm5 mm, 1551.4 mm
#1EU Melamine 18mm770 × 187.2 mm796.2 mm, 1877.8 mm
#1EU Melamine 18mm800 × 127.2 mm1608.2 mm, 1937.8 mm

Built for Oversize Melamine Panels & Edge-Banded Carcasses

Unlike standard 4×8 plywood, commercial melamine and MDF sheets often ship in oversize formats — 49" × 97" in North America, 2750 × 1830 mm in Brazil and Latin America, or 2800 × 2070 mm across Europe — specifically to allow perimeter trim cuts around chipped melamine edges.

PlankWise lets you set a dedicated 5–10 mm edge trim margin, mark exposed T/B/L/R edges for 0.45 mm or 2 mm ABS/PVC edge banding, and compute exact roll quantities automatically.

Melamine & MDF Cutting Best Practices

  • Keep a 5 mm perimeter trim on raw melamine sheets so scoring blades remove factory edge chips cleanly.
  • Solid-color white or matte melamine sheets do not require grain lock — uncheck Grain to gain 6–12% extra yield.
  • When cutting textured woodgrain melamine, lock Grain on all visible fronts and gables so horizontal and vertical grain lines match.

Specialized Material Cut Optimizers

Workshop Engineering Guides

Workshop Questions & Technical FAQ

Why do melamine sheets need a perimeter edge trim margin?
Melamine resin coatings chip easily during warehouse transit. Trimming 5–10 mm off each perimeter edge guarantees clean glue joints and chip-free edge banding.
Does the optimizer calculate total PVC or ABS edge banding length?
Yes. Simply tick the T, B, L, or R checkboxes on each part row and PlankWise calculates net linear banding plus flush-trim overhang allowance and roll count.
What blade kerf works best on a sliding panel saw with a scoring blade?
Most European sliding table panel saws use a 3.2 mm main blade matched with a 3.2–3.4 mm conical scoring blade. Enter 3.2 mm or 3.4 mm in the Kerf field.