Edge Banding Length & Roll Calculator

Mark Top, Bottom, Left, and Right exposed edges on every cabinet panel to compute net linear banding, flush-trim overhang waste (+40 mm/edge), rolls needed, and cost.

Project Presets:100% Free · Unlimited Runs

Stock Sheets1

Quick Stock:
MaterialLength (mm)Width (mm)QtyCost ($)

Parts Cut List18

Part LabelLength (mm)Width (mm)QtyGrainBanding

Saw & Kerf Settings

Length-BSSF-Vert
Sheets Needed
2
18/18 pieces placed
Efficiency
54.0%
6.26 m²
Waste Area
46.0%
5.33 m²
Est. Material Cost
$172.00
2 sheets
Linear Saw Cuts
44.90 m
Blade Kerf: 3.2 mm
Edge Banding
28.47 m
T/B/L/R
Amber edge = Edge bandingHatched = Offcut / waste

Edge Banding Roll & Overhang Estimator

Net Banded Length28.47 m
Flush-Trim Overhang (+40mm/edge)+1.84 m
Gross Tape Needed30.31 m
Rolls to Buy1 × 50m
Est. Banding Cost$24.00
Sheet #1 — EU Melamine 18mm (2800 × 2070 mm)
12 parts75.3% Used24.7% Waste
2800 mm2070 mm383.6 × 2060 mm800 × 127.2 mm788 × 320.8 mm770 × 187.2 mmBottom Base Deck — 1600 × 480 mm @ (5 mm, 5 mm)Bottom Base Deck1600 × 480 mmBottom Base Deck — 1600 × 480 mm @ (5 mm, 488.2 mm)Bottom Base Deck1600 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 5 mm)Cabinet Side Panel800 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 488.2 mm)Cabinet Side Panel800 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 971.4 mm)Cabinet Side Panel800 × 480 mmCabinet Side Panel — 800 × 480 mm @ (1608.2 mm, 1454.6 mm)Cabinet Side Panel800 × 480 mmDrawer Front — 788 × 190 mm @ (5 mm, 971.4 mm)Drawer Front788 × 190 mmDrawer Front — 788 × 190 mm @ (5 mm, 1164.6 mm)Drawer Front788 × 190 mmDrawer Front — 788 × 190 mm @ (5 mm, 1357.8 mm)Drawer Front788 × 190 mmDrawer Front — 788 × 190 mm @ (5 mm, 1551 mm)Drawer Front788 × 190 mmAdjustable Shelf — 770 × 450 mm @ (796.2 mm, 971.4 mm)Adjustable Shelf770 × 450 mmAdjustable Shelf — 770 × 450 mm @ (796.2 mm, 1424.6 mm)Adjustable Shelf770 × 450 mm
Sheet #2 — EU Melamine 18mm (2800 × 2070 mm)
6 parts32.7% Used67.3% Waste
2800 mm2070 mm450 × 513.6 mm1573.6 × 2060 mm760 × 463.2 mmAdjustable Shelf — 450 × 770 mm @ (5 mm, 5 mm)↻ 90°Adjustable Shelf450 × 770 mmAdjustable Shelf — 450 × 770 mm @ (5 mm, 778.2 mm)↻ 90°Adjustable Shelf450 × 770 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 5 mm)Cabinet Door Front760 × 396 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 404.2 mm)Cabinet Door Front760 × 396 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 803.4 mm)Cabinet Door Front760 × 396 mmCabinet Door Front — 760 × 396 mm @ (458.2 mm, 1202.6 mm)Cabinet Door Front760 × 396 mm

Exact Cut Schedule & Coordinates

18
Sheet / BarPart LabelDimensionsPosition (X, Y)Grain / RotBanding
#1Bottom Base Deck1600 × 480 mm5 mm, 5 mmGrain lockedTLR
#1Bottom Base Deck1600 × 480 mm5 mm, 488.2 mmGrain lockedTLR
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 5 mmGrain lockedT
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 488.2 mmGrain lockedT
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 971.4 mmGrain lockedT
#1Cabinet Side Panel800 × 480 mm1608.2 mm, 1454.6 mmGrain lockedT
#1Drawer Front788 × 190 mm5 mm, 971.4 mmGrain lockedTBLR
#1Drawer Front788 × 190 mm5 mm, 1164.6 mmGrain lockedTBLR
#1Drawer Front788 × 190 mm5 mm, 1357.8 mmGrain lockedTBLR
#1Drawer Front788 × 190 mm5 mm, 1551 mmGrain lockedTBLR
#1Adjustable Shelf770 × 450 mm796.2 mm, 971.4 mm0°T
#1Adjustable Shelf770 × 450 mm796.2 mm, 1424.6 mm0°T
#2Adjustable Shelf450 × 770 mm5 mm, 5 mm↻ 90°T
#2Adjustable Shelf450 × 770 mm5 mm, 778.2 mm↻ 90°T
#2Cabinet Door Front760 × 396 mm458.2 mm, 5 mmGrain lockedTBLR
#2Cabinet Door Front760 × 396 mm458.2 mm, 404.2 mmGrain lockedTBLR
#2Cabinet Door Front760 × 396 mm458.2 mm, 803.4 mmGrain lockedTBLR
#2Cabinet Door Front760 × 396 mm458.2 mm, 1202.6 mmGrain lockedTBLR

Usable Offcut Scrap Inventory7

Saved offcuts ≥ 100×100 mm (4"×4") suitable for drawers, jigs, or cleats.
SheetMaterialDimensionsPosition (X, Y)
#2EU Melamine 18mm1573.6 × 2060 mm1221.4 mm, 5 mm
#1EU Melamine 18mm383.6 × 2060 mm2411.4 mm, 5 mm
#2EU Melamine 18mm760 × 463.2 mm458.2 mm, 1601.8 mm
#1EU Melamine 18mm788 × 320.8 mm5 mm, 1744.2 mm
#2EU Melamine 18mm450 × 513.6 mm5 mm, 1551.4 mm
#1EU Melamine 18mm770 × 187.2 mm796.2 mm, 1877.8 mm
#1EU Melamine 18mm800 × 127.2 mm1608.2 mm, 1937.8 mm

Never Run Short on Matching Edge Banding Mid-Project

Running two meters short of matching textured melamine edge tape delays an entire kitchen install. While raw part perimeters tell you net length, real iron-on and edgebander work consumes 30–50 mm of extra overhang per banded side for end-trimming.

PlankWise sums every checked T/B/L/R edge directly from your live cut list, adds configurable overhang allowance, highlights banded sides in amber on your SVG and PDF diagrams, and tells you exactly how many 25 m or 50 m rolls to order.

Edge Banding Workshop Guidelines

  • If using thick 2 mm ABS banding on doors, remember to deduct 2 mm per banded edge from your raw cut dimensions if your shop cuts to finished size.
  • Always verify overhang allowance: automatic edgebanders typically require 40–60 mm of lead-in/lead-out tape per side.
  • Amber edge highlights on the PDF Cut Plan immediately show your shop crew which sides to feed through the bander.

Specialized Material Cut Optimizers

Workshop Engineering Guides

Workshop Questions & Technical FAQ

How is edge banding overhang allowance calculated?
PlankWise adds 40 mm (about 1-1/2") per individual banded edge on top of exact net part dimensions to cover lead-in, tail cut-off, and flush-trim waste.
Does rotating a part 90° affect which edges get highlighted for banding?
No! The optimizer maps your original Top/Bottom/Left/Right edge selection accurately through any 90° rotation so amber stripes always highlight the correct physical edge.
What standard edge banding roll lengths are supported?
You can edit the Roll Length input directly in the Edge Banding Estimator card (common rolls are 15 m, 25 m, 50 m, 100 m, or 76 m / 250 ft).